NON-SHRINKGROUT

ADVANTAGES
Eliminate shrinkage problems associated with conventional cement grouts and ensure effective contact and support. Facilitates rapid installation and early operation of plant because of high early strength. Factory controlled pre-packed components eliminate material selection, control arid operator problems on site.

 

SKU: GREENGROUTS -1040 Categories: ,

Description

DESCRIPTION
GREENGROUTS 1040 is a ready to use grouting mortar based on cement with carefully graded fine aggregate in combination with selected admixtures. MAIN PURPOSE For free flow grouting to provide heavy duty support beneath load bearing units. For machine base plates, crane and transport rails, anchors and dowels, bridge ambient etc.

PACKAGING, STORAGE & SHELF LIFE
The grey powder of GREENGROUTS 1040 is packed in 25kg per bag. Unopened GREENGROUTS 1040 has a shelf life of 12 months if kept in dry storage condition.
Remarks
GREENGROUTS 1040: max. size of aggregates 3mm

Instruction for Use
GREENGROUTS 1040 should be mixed with water to the desired consistency. Thorough mixing is essential. Add dry mix to water, not vice versa. GREENGROUTS 1040 should be placed immediately after preparation.
The top of the concrete base which is to receive the GREENGROUTS 1040 must be cleaned of all defective concrete, laitance, oil or grease. All loose or friable material must be removed. Compressed air is ideal for this purpose. Any ports of the equipment to be installed, with may come in contact with the grout must be carefully and completely cleaned of oil, grease or rust. The surface of the foundations should be saturated with water before the grout is placed. Mix the grout as close as possible to the equipment and have on hand a sufficient quantity to ensure that pouring will be continuous once it has started. Whether mixed by hand or by concrete mixer, add recommended amount of water to produce desired strength and flowability. Any machinery adjacent to the grouting operation, which might cause vibration of the foundation whilst grouting is in progress and before the mortar has set, must be shut down.

HEALTH & SAFETY
To avoid GREENGROUTS 1040 come into contact with skin & eyes or be swallowed, gloves & goggle are recommended when handling GREENGROUTS 1040. If eyes or skin contacted with the powder, wash thoroughly with clean water. If irritation persists, seek medical attention at once.