GREENSEAL EVERPOL PRIMER (Water Based).

Description

Greenseal Flexi 201 is a flexible cementitious waterproofing that consists of two components. It consists of Portland cement, and selected well graded sand, formulated with specially selected nd graded fine quartz and high-quality latex to create brushable smooth slurry with excellent bond and adhesion to most substrates. It is suitable to be applied to concrete and mortar to prevent water infiltration by filling and sealing pores and voids or hair line cracks in substrates. However, it provides a breathable coating which allows water vapour transmission.

USES

1. Bathrooms
2. Balconies
3. Sea Walls
4. Swimming Pools
5. Retaining Wall
6. Concrete Gutter / Roofs
7. Wet Kitchens
8. Water Tanks
9. Toilet

SURFACE PREPARATION
Surface preparations are required before using Greenseal Flexi 201.

1. Thoroughly clean concrete surfaces to ensure the surfaces are free from oil, grease, paint, loose dust, mud and laitance.
2. Honeycombs should be hacked off to expose the concrete.
3. All chipped or loose particles should be removed, the surface cleaned with water before repairing.
4. Apply Injection Grout to areas that were hacked.
5. Power float or steel trowel the surface to receive the waterproofing material.

Angle Fillet

1. All junctions between the slabs and walls, do an angle fillet of 25mm X 25mm with Greenseal Injection Grout.
2. Mix 3 parts of Greenseal Injection Grout /Greenseal 300 to 1part water to mix thoroughly to a mortar consistency and apply with a trowel for form an angle fillet.

Outlet and Pipe Penetration

1. Hack a V groove joint with a depth of 25mm surrounding the outlets and pipes. Wash thoroughly the hacked areas to expose the clean concrete surfaces between the outlet pipe and the concrete.
2. Mix 3 parts of Greenseal Injection Grout / Greenseal 300 to 1part water to mix thoroughly to a mortar consistently and apply with a trowel into the hacked V groove and level it to the
   concrete level.